Hex Nut 40% Glass-Filled Polyurethane
Isoplast hex nuts are high-strength, non-corrosive fasteners made from Isoplast engineered thermoplastics ETP), a type of rigid polyurethane. These nuts are often reinforced with long glass fibers (typically 40%) to provide mechanical properties comparable to aluminum while remaining much lighter and resistant to harsh chemicals.
|
Part Number
|
Across The Flats
|
Across The Points
|
Height
|
Thread
|
Qty.* | |
|---|---|---|---|---|---|---|
| HN4-40I* | 1/4 | 0.289 | 0.098 | 4-40 | ||
| HN4-48I* | 1/4 | 0.289 | 0.098 | 4-48 | ||
| HN6-32I* | 5/16 | 0.361 | 0.114 | 6-32 | ||
| HN8-32I* | 11/32 | 0.397 | 0.130 | 8-32 | ||
| HN10-32I* | 3/8 | 0.433 | 0.130 | 10-32 | ||
| HN10-24I* | 3/8 | 0.433 | 0.130 | 10-24 | ||
| HN1/4-20 | 7/16 | 0.505 | 7/32 | 1/4-20 | ||
| HN1/4-28I* | 7/16 | 0.505 | 7/32 | 1/4-28 | ||
| HN5/16-18I* | 1/2 | 0.577 | 17/64 | 5/16-18 | ||
| HN5/16-24I* | 1/2 | 0.577 | 17/64 | 5/16-18 | ||
| HN3/8-16I* | 9/16 | 0.650 | 21/64 | 3/8-16 | ||
| HN1/2-13I* | 3/4 | 0.866 | 7/16 | 4-40 | ||
| HN1/2-20I* | 3/4 | 0.866 | 7/16 | 1/2-20 | ||
| HN5/8-11I* | 15/16 | 1.083 | 35/64 | 5/8-11 | ||
| HN5/8-18I* | 15/16 | 1.083 | 35/64 | 5/8-18 | ||
| HN3/4-10 | 1-1/8 | 1.299 | 41/64 | 3/4-10 | ||
| HN3/4-16 | 1-1/8 | 1.299 | 41/64 | 3/4-16 | ||
| HN7/8-9I* | 1-5/16 | 1.516 | 3/4 | 7/8-9 | ||
| HN7/8-14I* | 1-5/16 | 1.516 | 3/4 | 7/8-14 | ||
| HN1/8I* | 1-1/2 | 1.732 | 55/64 | 1/8 | ||
| HN1-12I* | 1-1/2 | 1.732 | 55/64 | 1-12 | ||
| HN1-14I* | 1-1/2 | 1.732 | 55/64 | 1-14 |
Ready to submit your quote? Click the button below to review your quote, then send it on and we will get back to you ASAP on your request!
Part Added to Quote