Metallic Liquid Tight Conduit Fittings Straight-Thru, NPT Hubs
Features
- Cost effective die-cast zinc construction provides durability and resists rough environments.
-
Liquid Tight when used with Liquid Tight Conduit.
- Provide smooth connection, no sharp edges to strip wire.
- Suitable for outside, inside, and industrial uses including transformer connections, air conditioning, and heating.
- Suitable for use in both wet and dry location.
- Fit the most common sizes of nonmetallic liquid tight conduit.
- If using a tapped hole, Teflon® tape is needed on the threads of the connector, for all other applications an O-ring and Locknut are needed to attain liquid tight.
- Supplied with locknut and plastic sealing ring.
- DFARS Compliant
QuickSpecs
|
Material
|
Die cast zinc
|
|
|---|---|---|
|
Certifications
|
 |
Certified by Underwriters’ Laboratories for compliance with both Canadian and U.S. requirements under File E28430
|
|
Part Number
|
Trade Size
|
Clearance Hole
|
Max Overall L
|
Thread L
|
Nut THK
|
Across the Flat
|
Qty.* |
|---|---|---|---|---|---|---|---|
| LTCON3/8X890DCZ | 3/8 | .890 | 1.27 | .49 | .16 | 1.19 |
|
| LTCON1/2X890DCZ | 1/2 | .890 | 1.27 | .49 | .16 | 1.19 |
|
| LTCON3/4X1.109DCZ | 3/4 | 1.109 | 1.37 | .50 | .19 | 1.50 |
|
| LTCON1X1.375DCZ | 1 | 1.375 | 1.67 | .58 | .16 | 1.69 |
|
| LTCON11/4X1.734DCZ | 1-1/4 | 1.734 | 2.06 | .61 | .20 | 1.73 |
|
| LTCON11/2X1.984DCZ | 1-1/2 | 1.984 | 2.09 | .63 | .21 | 2.20 |
|
| LTCON2X2.469DCZ | 2 | 2.469 | 2.15 | .63 | .21 | 3.03 |
|
Ready to submit your quote? Click the button below to review your quote, then send it on and we will get back to you ASAP on your request!
Part Added to Quote